When the aquatic product aerator is started, it is necessary to closely observe the steering and operation conditions. The aerator should be repaired and maintained after each year to ensure normal operation in the coming year. If so, cut off the power supply, connect the fuse and restart it. At ordinary times, pay attention to whether there are entanglements or attachments on the impeller, and remove them in time. The position of the impeller in the water should be aligned with the ’waterline’.
If the aquatic aerator is not used properly, it will consume electricity and increase the cost of breeding, but it will not have the effect of aeration. The protective cover is a device to protect the motor from water and must be installed correctly. I will briefly introduce a few points for friends to refer to. When the aerator is launched into the water, the whole should be kept level or moved into the water at a small angle to prevent oil from spilling in the air vent of the reducer.Different species of aquaculture animals use different aerators. If there is an abnormal sound, the steering is reversed, and the operation is unequal, it should be stopped immediately, and the abnormal phenomenon should be eliminated before the operation is turned on. Second, the aerator should be turned on at noon on sunny days and noon in hot seasons; at noon when the water is too fat; open at midnight in continuous rainy weather; open in the morning on cloudy days; high-density breeding is opened before and after feeding.
So, how to use aerators? First, there are many types of aerators. 4. At the same time, it can also inhibit the growth of anaerobic bacteria in the water and prevent the deterioration of the pond water from threatening the living environment of the fish.. After the aerator enters the pool, the torsion is very large, so you must not take a floating body to observe in front of the aerator. Third, always pay attention to check the aerator circuit to ensure that there is no leakage and uninterrupted power. If there is no ’waterline’, the upper end surface should generally be parallel to the water surface to prevent overload and burn the motor.
The cable must not be under tension in the pool and must not be pulled as a rope. For more application information, please call our contact number for consultation, and look forward to your visit. If there is a ’buzzing’ sound when the aquaculture aerator aerator is working, check the circuit to see if there is a phase loss operation. It is strictly forbidden for the motor to come into contact with water, so as not to burn the motor due to water immersion. Too deep will increase the load on the motor and damage the motor. The impeller blades are immersed in the water to a depth of 4 cm. 1. Its main function is to increase the oxygen content in the water to ensure that the fish in the water will not be hypoxic.
When choosing an aerator, pay attention to its working depth. The aerator generally relies on its own air pump to pump air into the water to achieve the purpose of increasing the oxygen content in the water.Check the floating body every year, so as not to reduce the buoyancy due to the abrasion of the floating body, which may increase the load and burn out the motor.
The cable should be fixed on the rack with a lock clip and shall not be allowed to fall into the water. You may not know much about the safe operation of aquatic aerators. When installing the aerator, be sure to cut off the power supply. The remaining part shall be led to the shore power source as required.Aquatic aerator is a kind of machine often used in fishery and breeding industry. The working conditions of the aerator are bad, and the user should be equipped with thermal cutouts, thermistor protectors and electronic protection devices. Generally, fish ponds use impeller-type aerators
https://www.chinaaerator.net/product/solar-powered-shrimp-auto-feed-machine.html
If the aquatic aerator is not used properly, it will consume electricity and increase the cost of breeding, but it will not have the effect of aeration. The protective cover is a device to protect the motor from water and must be installed correctly. I will briefly introduce a few points for friends to refer to. When the aerator is launched into the water, the whole should be kept level or moved into the water at a small angle to prevent oil from spilling in the air vent of the reducer.Different species of aquaculture animals use different aerators. If there is an abnormal sound, the steering is reversed, and the operation is unequal, it should be stopped immediately, and the abnormal phenomenon should be eliminated before the operation is turned on. Second, the aerator should be turned on at noon on sunny days and noon in hot seasons; at noon when the water is too fat; open at midnight in continuous rainy weather; open in the morning on cloudy days; high-density breeding is opened before and after feeding.
So, how to use aerators? First, there are many types of aerators. 4. At the same time, it can also inhibit the growth of anaerobic bacteria in the water and prevent the deterioration of the pond water from threatening the living environment of the fish.. After the aerator enters the pool, the torsion is very large, so you must not take a floating body to observe in front of the aerator. Third, always pay attention to check the aerator circuit to ensure that there is no leakage and uninterrupted power. If there is no ’waterline’, the upper end surface should generally be parallel to the water surface to prevent overload and burn the motor.
The cable must not be under tension in the pool and must not be pulled as a rope. For more application information, please call our contact number for consultation, and look forward to your visit. If there is a ’buzzing’ sound when the aquaculture aerator aerator is working, check the circuit to see if there is a phase loss operation. It is strictly forbidden for the motor to come into contact with water, so as not to burn the motor due to water immersion. Too deep will increase the load on the motor and damage the motor. The impeller blades are immersed in the water to a depth of 4 cm. 1. Its main function is to increase the oxygen content in the water to ensure that the fish in the water will not be hypoxic.
When choosing an aerator, pay attention to its working depth. The aerator generally relies on its own air pump to pump air into the water to achieve the purpose of increasing the oxygen content in the water.Check the floating body every year, so as not to reduce the buoyancy due to the abrasion of the floating body, which may increase the load and burn out the motor.
The cable should be fixed on the rack with a lock clip and shall not be allowed to fall into the water. You may not know much about the safe operation of aquatic aerators. When installing the aerator, be sure to cut off the power supply. The remaining part shall be led to the shore power source as required.Aquatic aerator is a kind of machine often used in fishery and breeding industry. The working conditions of the aerator are bad, and the user should be equipped with thermal cutouts, thermistor protectors and electronic protection devices. Generally, fish ponds use impeller-type aerators
https://www.chinaaerator.net/product/solar-powered-shrimp-auto-feed-machine.html
コメント